Vertical side Wall:
V-Series mixers
A vertical feed mixer wagon is a type of feed mixing equipment identified by its vertical orientation, consisting of a tub and vertical cutting augers where ingredients are cut and blended. The two main types of vertical mixers are sloped side wall (S-Series) and vertical side wall (V-Series) mixers.
The V-Series mixer has tub side walls that have no slope. The design of a wider floor allows for lower height and narrower width for door and alley clearance, but will require a bit more horsepower.
The S-Series mixer has tub side walls that have the same slope as the front and back walls. This creates a consistent mixing action from front to back and side to side. This design requires less horsepower, but is taller and wider at the top.
V-Series FEATURES
- Thick Rubber Extensions
- Abrasion-Resistant Auger Flighting
- Heavy Duty Side Walls and Floor
- Plate Steel Frame
- Heavy Stainless Steel Conveyors
- Heavy-Duty Chain System
- Heavy-Duty Drive Components
- Large Viewing Platform
| THE SPECS | 810V | 980V | 1210V | 1810V | |
|---|---|---|---|---|---|
| Capacity W/ Rubber Ext. | 840 ft3 (23 m3) | 1020 ft3 (29 m3) | 1240 ft3 (35 m3) | 1830 ft3 (52 m3) | |
|
Capacity Top of Steel |
706 ft3 |
882 ft3 (25 m3) |
1094 ft3 |
1616 ft3 (46 m3) |
|
| Light Ration Capacity | 20,950 lbs | 25,500 lbs | 30,975 lbs | 45,525 lbs | |
| Heavy Ration Capacity | 29,330 lbs | 35,700 lbs | 43,365 lbs | 63,735 lbs | |
| Width W/ Flip-Up Conv. | 120 in (3 m) | 120 in (3 m) | 120 in (3 m) | 120 in (3 m) | |
| Width W/O Mag Tray | 103 in (2.6 m) | 103 in (2.6 m) | 103 in (2.6 m) | 103 in (2.6 m) | |
| Tub Width | 103 in (2.6 m) | 103 in (2.6 m) | 103 in (2.6 m) | 103 in (2.6 m) | |
| Overall Length | 332 in (8.4 m) | 336 in (8.5 m) | 342 in (8.68 m) | 450 in (11.4 m) | |
| Overall Height Top of Steel | 106 in (2.69 m) | 119 in (3 m) | 134 in (3.4 m) | 131 in (3.3 m) | |
| Overall Height W/ Rubber Ext. | 116 in (2.9 m) | 129 in (3.27 m) | 144 in (3.65 m) | 138 in (3.5 m) | |
| Weight Empty | 22800 lbs (10341 kg) | 23500 lbs (10659 kg) | 25400 lbs (11521 kg) | 34500 lbs (15649 kg) | |
| Floor Thickness | 3/4 in AR200 (19.1 mm) | 3/4 in AR200 (19.1 mm) | 3/4 in AR200 (19.1 mm) | 3/4 in AR200 (19.1 mm) | |
| Wall Thickness | 3/8 in AR200 (9.5 mm) |
3/8 in AR200 (9.5 mm) |
3/8 in AR200 (9.5 mm) | 3/8 in AR200 (9.5 mm) | |
| Auger Flights | 3/4 in 19.1 mm AR200 | 3/4 in 19.1 mm AR200 | 3/4 in 19.1 mm AR200 | 3/4 in 19.1 mm AR200 | |
| SS Conveyor Floor | 3/16 in SS (4.8 mm) | 3/16 in SS (4.8 mm) |
3/16 in SS (4.76 mm) | 3/16 in SS (4.8 mm) |
|
| Minimum HP Requirements | 140HP | 180HP | 200HP | 250HP |
